30″ x 42″ Die Cutter with Foil Stamping
30″ x 42″ Die Cutter with Foil Stamping
$0.00
YOCO
JY-106T
Transversal Foil Stamping
- With 2 designs in transversal direction: foil feeding and pulling.
- Max. stamping size up to 1040x715mm.
- Max. foil diameter up to 200mm.
- Foil rewinding and unwinding are outside the machine, easy to operate which improve efficiency.
- Waste foil collecting is fixed at op.side which makes easier for operator to check stamping quality.
Longitudinal Foil Stamping
- The vertical rewinding unit is built inside the machine which can maximize the usage of foil.
- Operator can go inside the machine to change foil and hence saving changeover time.
- Both the foil control cabinet and the foil rewinding units are inside the machine to allow more space. The maximum foil size is 220mm in diameter.
- The waste foil rel.’tinding standard is inside machine which is most suitable for collecting narrow foil. This can also avoid dust from the foil carried by brushes. Optional is outside brush device to collect the waste foil.
Foil Stamping Description
- Foil stamping blocks are fixed on the honeycomb plate. Equipped with film holder for easy make-ready.
- Adopts automatic pressure increase and automatic no paper pressure decrease system.
- Dwell time pressure is available for big surface foil stamping.
- Independent air pressure cylinder is available for air separation of big surface foil stamping.
Control Interface
- The standard configuration of bronzing adopts 12-zone temperature control, which is uniform and reliable. Temperature adjustment is carried out on the touch screen, and the control temperature error is+ 1 degree Celsius
- A control system, foil feeding and machine speed can be synchronized
- Each servo system can be individually controlled for speed regulation
- Equipped with air blowing and stripping angle control system, aluminum foil breaking and use-up alarm system
| Max. Sheet Size | 750 x 1060 mm | 29.53″ x 41.73″ | |
| Min. Sheet Size | 380 x 380 mm | 14.96″ x 14.96″ | |
| Max. Cutting Size | 720 x 1040 mm | 28.35″ x 40.94″ | |
| Max. Stamping Size | Longitudinal: 730 x 1040 mm | 28.74″ x 40.94″ | Transversal: 715 x 1040 mm | 28.15″ x 40.94″ |
| Inside Chase | 760 x 1120 mm | 29.92″ x 44.09″ | |
| Min. Gripper Margin | 9 mm | 0.35″ | |
| Max. Pressure | 300 Tons | |
| Max. Cutting Speed | 7,500 Sheets per Hour | |
| Max. Stamping Speed | 6,000 Sheets per Hour | |
| Heating Zones | 12 Areas | |
| Number of Foil Rollers | Longitudinal: 3 | Transversal: 2 |
| Max. Pile Height at Feeder | 1600 mm | 62.99″ | |
| Max. Pile Height at Delivery | 1350 mm | 53.15″ | |
| Machine Dimensions | 19.7′ L x 14.6′ W x 7.5′ H | |
With an over 100-year legacy, The YOCO Group — originally founded under the Yawa brand — is a market leader and one China’s top three Auto-Platen Die Cutter manufacturers. Their product range includes Automatic Die Cutters in (5) sizes — 76cm (30″), 85cm (33″), 106cm (42″), 145cm (57″) and 165cm (65″). Also included in their portfolio are Die Cutters with Foil Stamping and Stripping capabilities in 76cm, 85cm, 106cm, & 145cm size with an optional (5 minute foil cassette system). For quick changeover from dedicated Foil Stamping to Die Cutting & Stripping, offering dual utility in one one machine. YOCO also offers dedicated offline blanking machinery in 106cm formats. Their factory, located in Shanghai, China, spans over 30,000 square meters. Their products are sold both domestically and internationally, with over 60% exported. Currently, more than 1,000 of their machines are operating worldwide. Click here to view YOCO’s Partners Page for more information!